For whatever reason, mine hangs when its loading. Anyone have a solution to this? Only outstanding issue is getting the networking fixed. It came up Please restart your computer, the guest os'es I tried: FreeBsd, winnt,. Another place to check is opening up a Terminal window and looking around the installation disc. You don't have to but I recommend that you allocate the disk space now so that disk performance is increased. If the hard drive is not partitioned and formatted, it will not appear in the installer screen.
Should work without any problems, and I dont see any restrictions being in safe mode. The trick is to make sure the builtin-serial device is detected. But after 5-10 minutes it will actually boot into the disk, just takes a while I guess. However, if you ever get into a situation where the system preferences network app no longer functions, you may have to start from a clean deadmoo image. Simply dd the image in the same manner to any physical drive in your pc, and when its done boot to that drive and it should work. Remark This method doesn't seem to work with deadmoo's image.
I use vmware workstation 5. You can also post a topic in the InsanelyMac Forums and see if someone on the forums can help you. I'm surprised how snappy it feels good response and obviously, it looks very pretty. Hope this little nugget brings us closer to a real solution. I use my iMac at work so rarely, I didn't realize it was working correctly! So far though, its only helped bring me shared folders, nothing else.
After I killed vmware I loaded the image and everything was great. You'll have to restart the whole installation process. I am currently downloading the 950 meg Xcode dmg to try this next step. I reset the root pw to allow root login, ran the tools, but it was halted because it could not locate kldstat. Note that this guide may not work for you because of incompatible hardware. On the boot prompt, type linux rescue Step 4.
The other serial port I bound to the Virtual Machine. Have tried to disable all networking including wireless networking, no avail. Please try reinstalling it, or contact the product's vendor for an update. I then used quit to save and quit. Quit Terminal and return to Installer. However, I used flag 1 to flag it again. Here is an picture of my screen so you can see the error.
I even made a few discoveries, i. That was on a P4 machine. No sound yet but I haven't tried to fix that so I'm not complaining. . A window should pop up showing the contents of the drive.
You can also restore a snapshot if you made one. Then i restarted and it seemed to work, but now at boot it loads the background and the bottom short cut menu for about3 seconds and then it disappears for a while and then comes back and it does this till vmware just shuts it down. The only things I can use are Disk Utility and Startup Disk. This activates the mouse and keyboard. Installed the bare minimum for a custom install. Installs perfectly, but won't boot.
I have tried to do that and the following link is my work on this. What are the processor patches, and how do I use them, and if they work, where can I get them? See the next step for further details. I bound one of them to Incoming Connections, no flow control, 115200. If someone has tips on how I can boost my performance please reply. You can find instructions in this post. Enter '-v -s' without quotations and press enter. You should be able to press Command Windows key + Q when asked to register.